Waterstops profiles


The profiles MIBOWS-WSE-WSB-WSBIQ-WSBE are produced with thermal plastic vinyl resins of exceedingly high quality. These materials confer to the profiles a high resistance to aging, to the aggressive action of alkaline/ acid substances and to the mechanical stimuli. They are employed, depending on the sections and the shape, in dilation joints, in casting and construction joints and in any type of structure (civil, industrial, etc.), in order to give to the latter a perfect hydraulic seal.

Profile for inner and outer structural/expansion/dilation joints
Any construction requires opportune structural intervals to allow for movement caused by ground settling, the thermal expansion of materials and deformation under load. A structural joint has the dual task of absorbing this movement in predetermined points of the structure to avoid the formation of cracks or fissures in adjacent areas and also acts as a barrier to ensure water, air and foreign bodies do not penetrate the interstice.
Structures in contact with water or dampness must be designed and constructed with the utmost care to ensure the joints are watertight. The MIBO WSB-WSBIQ-WSBE waterstops, made of PVC, with central ringshaped bulb are the perfect solution for a perfectly watertight seal.
  • The specifications of these profiles are long lasting and remain unaltered even at low temperatures
  • They do not require special warehousing or conditions
  • They can be supplied in various degrees of hardness and dimensions according to their destined use
  • Contrary to other neoprene or rubber profiles they can be easily welded one to another. The welding either with hot air or heated blades can be carried out on site
  • They are suitable for sea water contact
  • They comply with the regulations ASTM D. 412-75 and ASTM D. 746-747-2240 and the relating ISO

Ingredients: polyvinyl chloride
Color: black. Other colors on request

Specific weight:

1.40 -/+ 0.03 gr./cm3 (ISO1183)
Tensile stress: > 12 N/mm2 (ISO527)
Hardness: 70-75 +/- 2 Shore A15" (ISO868)
Elongation at break: >340% (ISO527)
Flexibility to cold: - 32 +/- 4 °C (ISO458/2)
Thermal stability: min. 80 +/- 5 (ISO182/A)
Oil resistance: normal resistance in case of short-term contact, not suitable for long-term diving. In the latter case it is necessary to formulate a specific compound for use
Hydrostatic pressure: WS < 0.5 atm WSE-WSB-WSBE-WSIQ from 0.5 to 2 atm.
Axial expansion: tWS < 10 mm WSE-WSB-WSBE-WSIQ from 10 to 20 mm.
Transverse movement: WS < 5 mm WSE-WSB-WSBE-WSBIQ from 5 to 10 mm.
Preservation:: the product will last 60 months circa from the date of production if stored in its original and sealed packages, in a dry place and with temperatures not exceeding 30°C. They need to be protected from UV rays.

Code A B C
MIBOWSB180 180 2,5 12
MIBOWSB200 200 2,5 12
MIBOWSB220 220 3 12
MIBOWSB250 250 3,5 12
MIBOWSB300 300 3,5 12
MIBOWSB320 320 3,5 12
MIBOWSB350 350 4 12
MIBOWSB360 360 4,2 12
MIBOWSB440 440 4,2 12

Code Width Weight/m Packaging
MIBOWSB 180 mm. 180 960 gr. 25 mt.
MIBOWSB 200 mm. 200 1320 gr. 25 mt.
MIBOWSB 220 mm. 220 1560 gr. 25 mt.
MIBOWSB 250 mm 250 1800 gr. 25 mt.
MIBOWSB 300 mm. 300 2150 gr. 20 mt.
MIBOWSB 320 mm. 320 2466 gr. 15 mt.
MIBOWSB 350 mm. 350 2933 gr. 15 mt.
MIBOWSB 360 mm. 360 3200 gr. 15 mt.
MIBOWSB 440 mm. 440 3920 gr. 12,5 mt.

The inner profiles (WS-WSB-WSBIQ) must drawn in the concrete and have to be secured to the framework to ensure a certain stability during casting and to avoid the formation of folds. The outer profiles (WSE-WSBE) must be secured directly on the formworks or on the foundations, with the anchoring blades pointed towards the casting. The profiles can be welded directly on site with an electric hot air welding machine. It is advised to have care to vibrate the casting near the joint, in order to avoid the creation of the so called gravel nests.
MIBO WS-WSE profile are used for cold joints where the concrete has been cast at different times and there are iron rods passing through one casting and another. MIBO WSB-WSBIQ WSBE profiles are used instead for expansion joints, where concrete castings cast at different times feature a cavity equal to the width of the bulb and the cavity must be filled with a suitable elastic material. In this case there are not iron rods passing through one casting and another.

MIBO WSB The electric hot air blow pipe are used to make special “L”, “T” or cross couplings.

The products are produced with the best row materials available on the market in order to obtain a high quality product. Our guarantee covers the quality of the product but not its applications which cannot be under our control..


Mibo S.r.l. - Head and Operative offices: Via Chiavegoni, 11 - 36040 Brendola (VI) Italy
Tel/Fax: +39 0444 569182 - edilizia-meccanica@mibosrl.it - P.Iva: 01619760240 - Cookie Policy  Privacy Policy